HL Turbo-style Mill is a new generation mill manufactured by our
company in absorption of the advantages of Germany NIZI products
and in accordance with our experience in material crushing. The
mill is mainly used in pulverization and processing of materials
with medium and low rigidity among chemicals, dyestuff, accessory
ingredients, feedstuff, foodstuff (such as ginger, chili, pepper,
naked oat, soybean, aniseed, cassia, and tea), pharmaceuticals,
non-metallic mines, etc. Having the advantages of high output, fine grain size, low rumbling
noise, low energy consumption, simple maintenance and convenient
installation, it is particularly suitable for pulverization and
processing of low-rigidity materials of chemicals, pharmaceuticals,
foodstuff, feedstuff and non-metallic mines. |
While the Turbo-style Mill runs, the principal axis and turbo are
driven by electric motor to rotate with high speed. Turbo and
abrasive blocks around the screen are functioned as smashing and
pulverizing pairs. When materials entry the cabinet from the feed
hopper, they rub closely in the rotating air stream of turbo and
are lashed strongly onto the inner side of vanes, and are
pulverized again in the gap between vanes and abrasive bricks.
While smashing materials, the turbo absorbs a great deal of air
which is used to cool the machine, pulverize the materials and
carry fine materials. The smashing fineness of materials lies on
the nature of materials, size of the screen, and the amount of
materials and air.
The axle bearing component of WF Turbo-style Mill is installed of
tailor-made labyrinth seal, which can effectively prevent dust from
coming into the axle bearing cabinet, and thus the operation life
of axle bearing is prolonged. |
1. Strong smashing power, low energy consumption, and comparatively
small fineness of products.
2. With large smashing space, the supreme air pressure produced
while the turbo rotates can not only increase the throughput and
reduce the over-smash phenomenon, but also can effectively avoid
sediment and blockage of screens during the smashing process of
materials.
3. Owing to the strengthened cutting, the smashing power of fibroid
materials is higher than that of common equipment.
4. Screens are convenient to install, reliable of fixing, and all
adopt the plug-in type. Comparing to ring screen, their service
life is much longer.
5. Because of the inner concealed motor, the center of gravity of
the machine is lowered, and as a result, the noise of equipment is
effectively reduced. |
